+39 06 92 91 9797 info@ramesrl.it


STORM THz Detector

Status: active (Kick-Off January 2021, update June 2021)

RAME is involved by the SBAI Department (Sapienza Università di Roma) as the main technological partner for the design of a CMOS-based innovative THz detector cells array.

The finalized design has been submitted for fabrication in June 2021 in the LFoundry LF11IS.

Update March 4 2022: open cap packaged dies arrived, measurement results at SBAI are expected by the end of the month.

Link at dedicated page.

Pluto in Space

Status: active (2020-2021)

RAME developed a prototype payload to be integrated in the Unisat7 platform (GAUSS srl Mission), planned to be launched in early March 2021.

The payload aims at the validation of the S-band NB-IoT radiolink between UEs ground terminals and a CubeSat Base Station deployed in a LEO orbit.

Link at dedicated page.

Tracking Receiver for MPR

Status: active (2020-2021)

RAME in collaboration with Italspazio is developing a SDR-based platform for processing Mono Pulse Radar signal.

The project aims to achieve a reconfigurable platform for non-GEO satellites tracking receivers.

Link at dedicated page.

3GPP Narrow-Band Internet-of-Things (NB-IoT) User Sensor Integration into Satellite​

Status: active  (Kick-Off April 1st 2020)

RAME is involved as the main technological partner in the consortium for the development of the ARTES Advanced Technology SOW (3A.106)​ European Space Agency programme.

Link at the project here.

Link to dedicated page here.

Easy Covid 19

Status: active

Radio Analog Micro Electronics srl is contributing to the Easy Covid 19 not-for-profit campaign. The first lot of 3D printed valves is going to be dispatched at end of March 2020. Up to 10 couples may be fabricated in a day through our facilities. We provide the ready to print file for Makerbot Replicator series here.

Link to dedicated page here.


Status: ended (2018)

RAME bid for LAerospaZIO (in consortium with ENEA, ASI and Consorzio di Ricerca Hypatia) is undergoing to evaluation by public commission. Public announcement can be found here. Project aims to the development of innovative Power Management Systems (PMS) in High Altitude Platform Systems (HAPS).


Status: ended (2017-2020)

RAME was involved as sub-contractor of Space Geomatica ltd in the upgrade of ESA Envisat RA-2 calibration transponder for the ESA Sentinel 3A and 3B SRAL instrument mission.

Link at the project: www.serac-crete.eu

Field testings have been successfully performed during 2020. The transponder has been eavaluated ready for the deployment in the forthcoming S3 ALT-MPC contract.


Status: suspended (2017-2018)

RAME is involved as sub-contractor of IPC2 srl in the development of traction control system for an innovative family of electric vehicles for mass transport in urban environment.


Status: ended (2017)

RAME bid for KETs has been evaluated as not financeable – public announcement can be found here. Project aimed for the development of innovative power management IC (PMIC) System in Package (SiP) solution for IOT applications.